Siser Soft Print 3.0 (fka. Softprint Transparent)

With only 45 (!) microns thick, the printable flex film Soft Print Transparent delivers ultra-thin, soft, elastic and color brilliant transfers for textile printing. Since the motif is printed mirrored on the hot melt side, after the transfer the print is well protected between film and textile. An application tape is not needed since the own transparent carrier is used for the transfer.

Soft Print Transparent is ideally suited for white or very light fabrics. It has a matte, non-reflecting surface and offers a pleasantly soft, textile touch.
Brilliant prints can be achieved i.a. with eco solvent inks (type: Eco-Sol Max-1 ,Eco-Sol-Max 2 and Eco-Sol-Max 3) by Roland, Mimaki or Mutoh.

Processing instructions:

Print and cut Soft Print Transparent in a mirror image. After drying, weed the exceeding material and then transfer with the polyester backing. Remove the polyester backing cold.

Tip: If you warm up the material before weeding for about 20 seconds on the printing plate (with 155 °C, opened heating plate above), it can be processed more easily.

Pressing recommendation: