Siser 3D Techno is a slightly stretchable polyurethane material which increases in volume during the thermal transfer process. The result is a 3D effect similar to screen printed ink. The average thickness after transfer, depending on the recommended processing parameters, is 0.5 mm. The non-adhesive polyester backing allows fast weeding.
Siser 3D Techno is made of polyurethane (200 micron) and offers a unique textile touch. The material can be cut with all customary plotters and is easily weeded afterwards.
Siser 3D Techno offers perfect hold on a variety of non-water repellant fabrics, such as Cotton, polyester, polyester-cotton blends, acrylic blends, fleece fabrics, polyester compounds, etc. This film is not suitable for sublimating textiles (see blockout vinyls)
Additional product information
Anmerkung
Discontinued!
VM_ProductType_Options
VM_ProductType_Foils
Colour
White
Width
50 cm
Parameters
Temperature
155 °C
Time
15 seconds
Pressure
medium (>3.5 bar)
Backing
remove warm
Washability
max. 40 °C (wait for 24 hours!)
Note:
Please observe the storage instructions in the data sheet.