Price reductions Available delivery methods: Pick up, UPS Standard (vinyls+tools), Shipping cost on request, DHL Standard (vinys+tools), UPS Express 12:00, UPS Express Saver, Free Shipping, Shipping cost on request, Standard Shipping International, Standard shipping (+ insurance), Standard shipping (hardware)
HS Foil is an innovative material for unique holographic effects on textiles which was developed to be used matching PS Adhesive. The easy-to-use foil matches customized designs on textiles by pressing it only for a few seconds onto the adhesive foil without needing to cut it previously.
HS Foil is an ecologically harmless material, and the material can be simply used with any of our offered heat presses.
HS Foil, if applied onto PS Adhesive provides perfect adhesion to various fabrics such as cotton, polyester compounds, and many more. It is offerend in various colours, and can be used on sublimation printed fabrics, too.
Processing instructions:
Remove the pink protection sheet and cut PS Adhesive in a mirror outline through the back of the hotmelt. Weed the exceeding material, then transfer it with the polyester backing. Remove the polyester backing warm . Now the metallic hot stamp foils can be applied.
Apply HS Foil by placing it onto PS Adhesive and removing the remaining pieces cold
Pressing recommendation:
Temperature
150 ° C
Time
10 seconds
Pressure
medium (3-4 bar)
Backing
remove cold
Washability
max. 30 ° C
Additional product information
VM_ProductType_Options
VM_ProductType_Foils
Colour
crystal gold
Parameters
Temperature
150°C
Time
PS Adhesive 5 seconds
HS Foil 10 seconds
Pressure
medium (3 – 4 bar)
Backing
remove cold
Washability
40°C max. (wait for 24 hours!)
Note: Remove the pink protection sheet and cut P.S. Adhesive in a mirror outline through the back of the hotmelt. Weed the exceeding material, then transfer it with the polyester backing. Remove the polyester backing warm. Now the metallic hot stamp foils can be applied.
Apply HS Foil by placing it onto P.S. Adhesive (coloured side up!) and pressing it as recommended. Remove the backing pieces cold.
Please observe the storage instructions in the data sheet.