Lotus LTS 138 S

Versatile Heat Press with 2 heating plates

The LTS 138 S with its two heating plates (top and bottom) is perfectly prepared for the application of Swarovski stones (or similar) onto textiles.

The specific design ensures an even and constant temperature of upper and bottom plate during the transfer process. The heating plates are either operated simultaneously, or the upper heating plate is operated individually. In addition, the temperature of the two plates, if desired, can be set independently of one another by two separate digital displays.

This versatile heat press can also be equipped with interchangeable lower printing plates (without heating).

Mikanit 2.0 heating technology

Fast heating and even and constant transfer temperature is guaranteed, as well as extended durability of the heating elements. The heating rods can be exchanged one by one. This represents a very economic as well as sustainable solution.

Benefit from our 10 years warranty on Lotus heating parts. And take advantage of a heating technology that saves energy consumption compared to most competitive heat presses.

Simplicity of use

During the transfer process, the smooth-running pressure arm automatically locks into place, so you don’t have to hold it down continuously. To release the pressure arm, simply lift it approximately 2 cm. The built-in spring mechanism will then hoist the heating plate automatically. No strength is required to raise it. The pressure can be continually adjusted with an easily accessible dial.

The freestanding printing plate

The freestanding printing plate of each press allows you to mount textiles easily in a single layer; only the fabric segment to be printed rests on the printing plate. Prints previously applied to the textile remain unaffected, and creases impairing the printing result (usually caused by two layers) are easily avoided.

Digital display

The clearly arranged digital display allows you to conveniently set and control transfer time and transfer temperature.

Dimensions

Perfect dimension for printing on various textiles. Transfer area: 38 x 45 cm, alternatively 40 x 50 cm as LTS 150 S.

Safety

The ergonomic function and electronic features ensure a safe working process